meta data for this page
This is an old revision of the document!
Nagios API
The software integration work to monitor the RECS®|Box System is quite simple as the the TOR-Master provides monitoring information in the Nagios native NRPE format. So only the NRPE plugin has to be installed and configured as follows. Here, a sample output can be found:
/usr/lib/nagios/plugins/check_nrpe -H 10.11.12.244 ⏎ -c check_temp -a 10.11.12.244 10 2 30 40 OK - Temperature: 29 C|temp=29,000000;30;40;10,000000;105,000000
The options are used as following: \\[1ex]
| Option | Description |
|---|---|
-H | Host to ask for data, this is always the IP of the TOR-Master (example: 10.11.12.244) |
-c | Plugin to run. Can be check_temp or check_power |
-a | Options to pass to the plugin, see more details in tables below |
Options for check_temp plugin:
| Option example | Description |
|---|---|
10.11.12.244 | Get sensor values from device with this IP (RCU/RPU) |
10 | Get sensor values from this baseboard (1 - 18) |
2 | Get values from this sensor (max, inlet, outlet, 0, 1, 2, 3, 4) |
30 | Upper warning threshold |
40 | Upper critical threshold |
Options for the check_power plugin:
| Option example | Description |
|---|---|
10.11.12.244 | Get sensor values from device with this IP (RCU/RPU) |
10 | Get sensor values from this baseboard (1 - 18) |
2 | Get sensor values from this node (1, 2, 3, 4) |
30 | Upper warning threshold [Watt] |
40 | Upper critical threshold [Watt] |