Server installation

The following chapter will give you an overview on how to install an maintain your RECS^®|Box.
When working on the RECS^®|Box always wear ESD protection equipment.

When removing a Carrier always work very carefully and do not bend the baseboards nor use greater force to get them into place.

When changing a module shut down all modules on the respective carrier and turn the power for the modules off in the managemant GUI. The rest of the system can stay powered.

A fan that has damaged blades schould be replaced immediately, because the bearing will break very fast due to the imbalance and resulting vibrations.
When changing a fan on a working system watch out that the system is not overheating during the changing process.