meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
documentation:netboard_installation [2014/11/14 09:40] micdocumentation:netboard_installation [2014/11/14 09:47] (current) mic
Line 1: Line 1:
 ====== Netboard installation ====== ====== Netboard installation ======
  
-All netboards (1GbE or 10GbE) have the same connector (as seen below) underneath and are all mounted on the three connectors on the backplane. Each netboard provides the compute network to the two baseboards that are plugged in right next to them. It is also possible to mix different netboards, as they are independent of each other.\\+All netboards (1****GbE or 10****GbE) have the same connector (as seen below) underneath and are all mounted on the three connectors on the backplane. Each netboard provides the compute network to the two baseboards that are plugged in right next to them. It is also possible to mix different netboards, as they are independent of each other.\\
   - To install a netboard simply place it over the connector with the correct orientation.   - To install a netboard simply place it over the connector with the correct orientation.
   - Align the connectors with the help of the smaller one.   - Align the connectors with the help of the smaller one.