meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
documentation:physical_interface [2016/11/07 08:43] – changed the frontview pictures micdoc_recs3:physical_interface [2020/03/04 13:09] (current) – ↷ Links adapted because of a move operation kru
Line 14: Line 14:
   * Six (Antares) or 18 (Arneb) LAN ports that connect to the compute network of the labelled node (network speed depends on the installed netboards [[documentation:netboard_installation|Netboard installation]]   * Six (Antares) or 18 (Arneb) LAN ports that connect to the compute network of the labelled node (network speed depends on the installed netboards [[documentation:netboard_installation|Netboard installation]]
  
-<imgcaption antars_front|>{{ :documentation:antares_front_rendered.png?nolink&800 |Frontpanel of the Antares}}</imgcaption> +<imgcaption antars_front|>{{ :documentation:rcu_antares_front.jpg?nolink |Frontpanel of the Antares}}</imgcaption> 
-<imgcaption arneb_front|>{{ :documentation:arneb_front_rendered.png?nolink&800 |Frontpanel of the Arneb}}</imgcaption>+<imgcaption arneb_front|>{{ :documentation:rcu_arneb_front.jpg?nolink |Frontpanel of the Arneb}}</imgcaption>
  
 ==== Control panel ==== ==== Control panel ====
Line 22: Line 22:
  
 ^  Antares  ^  Arneb  ^ Description ^ ^  Antares  ^  Arneb  ^ Description ^
-|  {{:documentation:lcd_recs_box_rcu_192_168_13_50.png?nolink|}}  || Shows the IP address of the RCU. | +|  {{:documentation:lcd_recs_box_rcu_192_168_13_50.png?nolink&288|}}  || Shows the IP address of the RCU. | 
-|  {{:documentation:lcd_health_ok_72_cpus_install.png?nolink|Arneb}}  |  {{:documentation:lcd_health_ok_24_cpus_2_psus.png?nolink|Antares}}  | Displays the current health status of the RCU and the number of compute modules installed. On the Antares the number of PSU****s installed is also shown. | +|  {{:documentation:lcd_health_ok_72_cpus_install.png?nolink&288|Arneb}}  |  {{:documentation:lcd_health_ok_24_cpus_2_psus.png?nolink&288|Antares}}  | Displays the current health status of the RCU and the number of compute modules installed. On the Antares the number of PSU****s installed is also shown. | 
-|  {{:documentation:lcd_6_on_42_w_avg_temp_28_c.png?nolink|}}  || In the first row the number of currently turned on compute modules is shown along with their current power consumption. The second row shows the current average temperature. | +|  {{:documentation:lcd_6_on_42_w_avg_temp_28_c.png?nolink&288|}}  || In the first row the number of currently turned on compute modules is shown along with their current power consumption. The second row shows the current average temperature. | 
-|  {{:documentation:lcd_0_off_l000200001_0_on_r030000000.png?nolink|Arneb}}  |  {{:documentation:lcd_0_off_l000_0_0_on_r000_0.png?nolink|Antares}}  | Shows the node on/off status for each baseboard. For ARM baseboards the number of nodes on is shown (0-4). A dash ("-") indicates baseboards that are not populated or where not found. In case of an Antares RCU also the status of the power supplies is shown. "L" and "R" mark the orientation of the display and are shown as looking onto the front panel. |+|  {{:documentation:lcd_0_off_l000200001_0_on_r030000000.png?nolink&288|Arneb}}  |  {{:documentation:lcd_0_off_l000_0_0_on_r000_0.png?nolink&288|Antares}}  | Shows the node on/off status for each baseboard. For ARM baseboards the number of nodes on is shown (0-4). A dash ("-") indicates baseboards that are not populated or where not found. In case of an Antares RCU also the status of the power supplies is shown. "L" and "R" mark the orientation of the display and are shown as looking onto the front panel. |
  
 The buttons next to the display will be used for a local management menu later on. Currently they are not used except for the "down" button: Press this key for a few seconds to safely shut down the management controller in the RCU before disconnecting power to the unit. The buttons next to the display will be used for a local management menu later on. Currently they are not used except for the "down" button: Press this key for a few seconds to safely shut down the management controller in the RCU before disconnecting power to the unit.
Line 49: Line 49:
   * Two line display   * Two line display
   * One LAN port that connects to the internal Colibri with the management software of the power supply   * One LAN port that connects to the internal Colibri with the management software of the power supply
 +
 ==== LCD display ==== ==== LCD display ====
  
 ^  Display  ^ Description ^ ^  Display  ^ Description ^
-| {{:documentation:lcd_recs_box_rpu_192_168_13_50.png?nolink|}} | Shows the IP address of the RPU | +| {{:documentation:lcd_recs_box_rpu_192_168_13_50.png?nolink&288|}} | Shows the IP address of the RPU | 
-| {{:documentation:lcd_health_ok_10_psus_install.png?nolink|}} | Displays the current health status of the RPU and the number of power supplies installed. | +| {{:documentation:lcd_health_ok_10_psus_install.png?nolink&288|}} | Displays the current health status of the RPU and the number of power supplies installed. | 
-| {{:documentation:lcd_2_on_15_w_oe_load.png?nolink|}}| Shows the numer of power supplies that are currenty on, and the power provided by the RPU. A percentage bar (10% steps) of the load is shown in the lower line. | +| {{:documentation:lcd_2_on_15_w_oe_load.png?nolink&288|}}| Shows the numer of power supplies that are currenty on, and the power provided by the RPU. A percentage bar (10% steps) of the load is shown in the lower line. | 
-| {{:documentation:lcd_0_off_l_00001_e_1_on_r_00001_e.png?nolink|}}| Shows the on/off status for each power supply (0=off 1= on). A dash (“-”) indicates power supplies that are not populated or where not found. “L” and “R” mark the orientation of the display and are shown as looking onto the front panel. |+| {{:documentation:lcd_0_off_l_00001_e_1_on_r_00001_e.png?nolink&288|}}| Shows the on/off status for each power supply (0=off 1= on). A dash (“-”) indicates power supplies that are not populated or where not found. “L” and “R” mark the orientation of the display and are shown as looking onto the front panel. |
  
 ==== Power connectors ==== ==== Power connectors ====
Line 64: Line 65:
 ===== Sensors ===== ===== Sensors =====
  
-Each Baseboard of the RECS<sup>(r)</sup>%%|%%Box system includes five temperature sensors that are regularly polled by the management software. This data is available in raw format via all [[Software interface|software interfaces]] provided by the TOR Master. Additionally, the TOR Master calculates some derived temperatures: Inlet- and outlet temperature (Arneb only) as well as the highest temperatures on baseboard, RCU and cluster level.+Each Baseboard of the RECS<sup>(r)</sup>%%|%%Box system includes five temperature sensors that are regularly polled by the management software. This data is available in raw format via all [[documentation:software_interface|software interfaces]] provided by the TOR Master. Additionally, the TOR Master calculates some derived temperatures: Inlet- and outlet temperature (Arneb only) as well as the highest temperatures on baseboard, RCU and cluster level.
  
 ==== Locations ==== ==== Locations ====